If you have a query about parts it would be much appreciated if you can call between 10 and 2.30
or email anytime sales@pauls-place.co.uk
Thank you

 

 

Bell housing / Accessories


 

Bellhousing Bolt/Washer Set

Use this bolt and washer set to bolt Aluminium GM Bellhousing onto the Small Block Chevrolet cyl block. Hex head.
PP-BY55002K Hex Head Steel bolts and washers for Small Block Chevy bell housing
£5.78
Prices are excluding VAT

Clutch Lever & Pivot for Chevy Engines

PP-BY15501 Adjustable fork pivot ball -Lakewood
Adjusts from approx 1-5/16” to 1-11/16” for Small Block Chevy Engines
£22.66
PP-BYSF1001 HD fork
£17.49
PP-BYV96001 Std pivot ball
£5.61
Prices are excluding VAT
Moroso - Moroso Offset Bellhousing Dowel Pins

Moroso Offset Bellhousing Dowel Pins

The longer dowel pins simplify the task of installing a bellhousing. The offset provides a method of aligning the trans input shaft to the pilot bearing. Alignment to within +/- .005” will ensure a clean clutch release, maximum pilot bearing & transmission life and reduce shifting problems. Packaged two to a card.
PP-BY37934 Dowel pin with .007 offset
£13.22
PP-BY37936 Dowel pin with .014” offset
£13.22
PP-BY37938 Dowel pin with .021” offset
£13.06
Prices are excluding VAT
McLeod - Steel SFI Bellhousings/Adaptors

Steel SFI Bellhousings/Adaptors

Standard cast aluminium bellhousings in a clutch/flywheel explosion would disintegrate leaving your legs in a very dangerous position. The McLeod one piece bellhousings are made using a hydraulic forming process that ensures a steel minimum thickness of a 1/4”. When used with the supplied block plate the housing is designed to contain a clutch/ flywheel explosion, meeting or exceeding SFI Spec 6.1.
PP-BY8607 Adaptor to fit Tremec [Ford] type, to various bellhousings
£149.80
PP-BY8630 Bellhousing & backplate
[will fit a DAX Cobra]
£334.87
Prices are excluding VAT
McLeod - Bellhousing (fits some Buick/Olds/& Pontiac)

Bellhousing (fits some Buick/Olds/& Pontiac)

Has two starter pockets. Also features dual fork holes that use either standard or cable linkage. Drilled for standard or cable ball studs. For 1962-92 Chev except Nova, Chevy II, & some V6.
PP-BY8650 McLeod Dual Bellhousing
£303.71
Prices are excluding VAT