If you have a query about parts it would be much appreciated if you can call between 10 and 2.30
or email anytime sales@pauls-place.co.uk
Thank you

 

 

Exhaust

Chevy exhaust manifold

Exhaust manifolds for chevy engines.


 

Flowtech - SBC Camaro Headers

SBC Camaro Headers

For 265 to 400 engines.
PP-BY11102 FlowTech 1982-91, shortie type
Not for angled plug heads, Not for use with TPI injection, where A.I.R. manifold is required. [avail to special order]. Air con OK. Limited ground clearance. The standard exhaust will need modifying. Has oxygen sensor position. Not for column shift.
Primary Tube Size: 1-1/2” Collector Size: 2.5”
£104.83
PP-BY11100 FlowTech for 1967-81
Headers will not fit angled plug heads, not for use with smog injection or injection heads and only for large unit (piston type) air compressor.
Also will not fit 1967-69 Camaros with A/C. A/C vehicles require bracket PP-BY20110. The standard exhaust will need modifying. Some models may have to have the Z bars removed.
Primary Tube Size: 1-5/8” Collector Size: 3”
£105.89
PP-BY65104 For 1970-81, 1-3/4” headers
For racing purposes only, will fit angled plug heads. Not for use with smog injection or injection heads. To keep the catalytic convertor the std exhaust will require modification. A/C vehicles require bracket PP-BY20110.
Primary Tube Size: 1-3/4” Collector Size: 3”
£202.73
PP-BY68470 For 1982-88, Shortie Style
Shortie style headers will fit angled plug heads, not for use with smog injection or injection heads. The standard exhaust will need modifying.
Primary Tube Size: 1-5/8” Collector Size: 3”
£169.52
PP-BY11116 For 1982-92 Z28, 305-350 -1-1/2”
These are shortie style headers. Will fit with Dart Sportsman 2 angle plug heads. To keep the catalytic convertor the std exhaust will require modification. Does have provision for an oxygen sensor.
Primary Tube Size: 1.5” Collector Size: 2.5”
£106.50
Prices are excluding VAT
Flowtech - FlowTech Chevy SBC Headers

FlowTech Chevy SBC Headers

PP-BY11112 For 265-400 engines 1955-57
For an engine swap, all parts must be factory standard. Not angle plug heads, not convertible.
Primary Tube Size: 1-5/8” Collector Size: 3”
£117.66
Prices are excluding VAT
Hedman Hedder - Street Rod Tight Tubes Hedman Headers

Street Rod Tight Tubes Hedman Headers

For SBC 265 to 400 engines.
PP-BY68500H Straight plug. These Hedders have an exclusive flat collector so they tuck in closer. Primary Tube Size: 1-5/8” Collector Size: 2-1/2”
£248.35
Prices are excluding VAT
Hedman Hedder - SBC Hedman Hedder Brackets

SBC Hedman Hedder Brackets

PP-BY20110 Air conditioning pump bracket
£12.24
PP-BY20040 Early alternator bracket adapter
Adapts early style alternator bracket to accept PP-BY20010.
£15.37
PP-BY20010 LH Alternator bracket
Alternator bracket for use with Camaro headers PP-BY68270.
£11.90
PP-BY20020 RH Alternator bracket
Alternator bracket for use with headers PP-BY68120 and PP-BY68130.
£12.76
Prices are excluding VAT
Flowtech - Flowtech Super Street Dual Exhaust 1970-81 Camaro

Flowtech Super Street Dual Exhaust 1970-81 Camaro

This is a top quality custom fit dual exhaust system, at an affordable price. Includes everything from the header flange back to the tailpipe excluding silencers. Pipes are 2-1/4” 16-gauge.
PP-BY51555 SBC Dual exhaust
£112.17
Prices are excluding VAT
Flowtech - Street Rod FlowTech Shortie Hedders

Street Rod FlowTech Shortie Hedders

PP-BY11030 BBC 396-454 engines
Primary Tube size: 1 3/4” Collector size: 2.5”
£135.54
Prices are excluding VAT
Hedman Hedder - BBC Camaro Hedders

BBC Camaro Hedders

Check for exclusions
PP-BY11132 BBC 396-454 engines, 1967-69
Primary Tube size: 1 7/8” Collector size: 3 1/2”
£145.13
PP-Real Steel Tel: For 396-454 engines, 1970-81
Primary Tube size: 2” Collector size: 3”		 £T.B.A
Prices are excluding VAT
Hedman Hedder - SBC Corvette Hedders

SBC Corvette Hedders

PP-BY68130 For 265-400 engines 1955-62
Primary Tube Size: 1-5/8” Collector Size: 3”		 £T.B.A
PP-BY11106 For 283-400 engines 1963-82
Not for use with smog injection or injection heads. To keep the catalytic convertor standard exhaust will require mods. Not column change. Cars with A/C will need bracket BY20110. Not angle plug.
Primary Tube Size: 1-5/8” Collector Size: 3”		 £T.B.A
Prices are excluding VAT
Flowtech - SBC Pick-ups and Van Headers

SBC Pick-ups and Van Headers

For 265 to 400 engines.
PP-BY69260 2WD 1/2-3/4 ton P/U 1955-65
Will not fit torsion bar suspension or vehicles with a std column shift. Primary Tube Size: 1-1/2” Collector Size: 3”
£179.85
PP-BY11500 FlowTech 2WD 1/2-1 ton p/u 1966-91
Not for use with smog injection or injection heads. To keep the catalytic convertor the std exhaust will require modification. Some vehicles (especially w/std col and std flr trans) may encounter clutch shaft interference and those with A/C may need bracket PP-BY20110. Read FlowTech book for many notes on above.
Primary Tube Size: 1-1/2” Collector Size: 3”
£104.83
PP-BY11506 FlowTech 4WD 1967-91
Not for use with smog injection or injection heads. To keep the catalytic convertor the standard exhaust will require modification. Vehicles with A/C will need bracket PP-BY20110. Not angle plug.
Primary Tube Size: 1-5/8” Collector Size: 2 1/2”
£105.89
PP-BY69060 Van 1971-88
Not for use with smog injection or injection heads. To keep the catalytic convertor the standard exhaust will require modification. Vehicles with air conditioning will require bracket PP-BY20110.
Primary Tube Size: 1-5/8” Collector Size: 3”
£179.85
Prices are excluding VAT

SBC Street Rod Shortie Headers

For 265 to 400 engines.
PP-BY10010 Hugger Toobs- SBC
Designed to connect PP-BY11000 / PP-BY31000 to existing exhaust systems.
£35.13
PP-BY31000 Metallic Ceramic Finish
These headers feature a high lustre silver finish for great look & rust & corrosion resistance. Not recommended for running in a new engine. See Flowtech book.
Primary Tube Size: 1-5/8” Collector Size: 2.50”
£263.12
PP-BY68400 OK with GM Alum' angled heads
Primary Tube Size: 1-5/8” Collector Size: 2.50”
£187.00
PP-BY11000 Straight plug
Primary Tube Size: 1-5/8” Collector Size: 2.50”
£122.54
Prices are excluding VAT
ARP - ARP Header Bolts-3/8” x .750”
ARP

ARP Header Bolts-3/8” x .750”

All kits come with precision-hardened washers.
PP-BY100-1202 Black oxide 12pt head. 16pcs
£17.83
PP-BY400-1202 Stainless steel 12pt, 16pcs
£24.18
PP-BY400-1103 Stainless steel Hex, drilled. 12pcs
£42.53
Prices are excluding VAT

Mercury Marine-Exhaust Manifolds & Risers

[usually with gaskets/studs]
PP-BYAJG685 3” Centre riser V6/V8 £T.B.A
PP-BYAJG680 4” Riser V6/V8 £T.B.A
PP-BYAJG710 Ex’ man’ 5.0/5.7 centre £T.B.A
PP-BYAJG700 Ex’ man’ 7.4/5.2L BBC £T.B.A
PP-BYAJG705 Exhaust man’ V6 4.3L £T.B.A
Prices are excluding VAT
Chevy exhaust manifold