Oil Pumps / Accessories

Oil Pumps-NOT 64-67 Chevy2

PP-BYDM-77HV

BBC high Volume pump 1965-76 - Designed to deliver an average of 22% more oil volume than std. 396,400,427,454 engines

£54.20

PP-BYDM-77

BBC std oil pump 1965-76 - 396,400,427,454 engines

£43.20

PP-BYM-55A

Melling High Pressure-5/8”
302 V8 1967-69
350 V8 1967-81 Hi-perf & spec Hi-perf

£44.15

PP-BYM-55HV

Melling High Volume-5/8”
Designed to deliver an average of 25% more oil volume than standard. Use steel drive shaft and larger sump with windage tray. Use the correct depth pickup for the sump being used.

£42.58

PP-BY10552C

Melling Race pump
Designed to deliver 10% more oil volume than standard. Has 3/4” inlet. Shaft supplied, steel gears, pinned drive gear, shaft support, screw in relief valve plug, provision for bolt on screen, anti cavitation grooves. Manganese phosphate coated for wear & rust prevention. For Racing use only.

£94.24

PP-BYM-155

Melling Standard-3/4” inlet
262 4.3-Z V6 1993 w/3/4” inlet hole
305 V8 1993 w/3/4” inlet hole
350 V8 1993 w/3/4” inlet hole
350 V8 1993-97 LT1 w/3/4” inlet hole
350 V8 LT4 1996

£41.82

PP-BYM-55

Melling Standard-5/8” inlet
262 4.3-Z V6 1985-93 w/5/8” inlet hole
262 V8 1975-76
265 V8 1994-96
267 V8 1979-82
283 V8 1958-67 excl Chevy II 1964-67
305 V8 1976-93 w/5/8” inlet hole
307 V8 1968-73
327 V8 1962-69 excl Chevy II 1964-67
348 V8 1958-61 excl Hi-perf
350 V8 1967-93 w/5/8” inlet hole, excl Hi-perf & special Hi-perf
350 V8 1992-94 LT1 w/5/8” inlet hole
400 V8 1970-76

£29.80

PP-BYM-46

Std V8 265- 1955-57, 283- 1957

£62.41

Oil Pump Spring

Increase your oil pressure and save bearings. For 283, 327, 350 and 400 engines.

PP-BY26MRG

Mr Gasket High-Pressure oil pump spring. For 283, 327, 350 and 400 engines.

£5.73

Canton Racing

Canton Special Oil Pickups

These pickups are designed to be used with a specific Melling oil pump and sump. Made from heavy gauge tubing with solid mounting brackets

PP-BY20-020

Canton for 7-1/2” sump, h/vol 5/8” Melling pump. Fits sump PP-BY15-250 & PP-BY15-250T only.

£47.66

PP-BY20-010

Canton for 7-1/2” sump, std 5/8” Melling pump. Fits sumps PP-BY15-250 & PP-BY15-250T only.

£44.53

Standard Oil Pump Pickup

PP-BYD-77S2

BBC 1965-85. 396, 402, 427 & 454 engines

£11.21

Moroso Oil Pump Shafts

A one piece shaft made of high grade steel, designed to replace the standard item. Features a special pinned steel sleeve to maintain correct alignment between oil pump and shaft, far better than the plastic sleeve on the standard item. For all engines NB: 400 small block eng requires machining, enlarging the hole for the shaft to a 9/16” dia.

PP-BY22080

HD BBC not tall deck

£18.74

PP-BY22070

HD SBC not 400

£18.81

Oil Pump Primer

The best way to build up oil pressure in a new engine before starting. The distributor is removed and the primer inserted in the oil pump drive where it engages the end of the oil pump drive; the other end fits a 3/8” chuck in a hand drill. Finished in a black oxide. For most engines.

PP-BY62200

Oil Pump Primer SBC/BBC

£16.95

Standard Oil Pump Pickups

PP-BY155S

Melling for 3/4” pump only
Check book for applications

£16.93

PP-BY12-46

Melling for 5/8” pump only
For 283 to 400 engines 1965-94 (Check each model)

£11.27

PP-BY55-S

Melling for models below
For 283 1958-64, 327 1962-64 & some Trucks

£16.60

Oil Pump Stud

PP-BY38150

Moroso for most engines
The 7/16” x 3-3/16” oil pump stud is made from 4130 steel, providing an improved normal mounting for oil pumps. The kit includes a self-locking nut and hardened, ground washer.

£9.80

Moroso Extended Oil Pickups

These extended oil pump pickups are designed to be where the oil is under racing conditions. All pickups are precision bent, heliarc welded and finished in black oxide.

PP-BY24440

For BBC Use with sump BY20401

£46.27

PP-BY24350

For SBC 8-1/4” sump, high volume pump. Fits sumps PP-BY20190 & PP-BY21010.

£48.34

PP-BY24170

For SBC 8-1/4” sump, standard pump. Fits sumps PP-BY20190, PP-BY21010 & PP-BY21900.

£48.60

PP-BY24318

For SBC PP-BY21312/PP-21313 sumps & PP-BY10552C, race oil pump with 3/4” inlet.

£49.39

PP-BY24861

For U-Weld-It for most SBC engines.
The U-Weld-It kit can be tailored for a 10-3/4” deep sump, using standard or high volume pumps.

£29.68

Oil Diverter Valves

Reduces oil flow to rocker arm assemblies and increases it in c/rod and main bearing areas. These valves fit small/big block chevy engines with screw-in style oil lifter gallery holes in the back of the engine block. They are not for use with hydraulic lifters. Packaged 2 per set, complete with 'O' rings. Will work with later block (allen key heads).

PP-BY22016

Moroso diverter valves

£21.63